cadastrophe
Mechanical
Does anyone know where I can obtain information on spun/rolled wheel dimensions, or possibly even drawings in .dxf? In particular, I'm interested in bead seat, radii, return lip, well and calliper clearance dimensions. Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Wheel dimensions
- Thread starter cadastrophe
- Start date
- Status
From another post. T&RA is the authority
+++
pardal (Automotive) Nov 11, 2001
I found all this data about Tire and Rim.
The Tire and Rim Association, Inc.
175 Montrose West Avenue
Suite 150
Copley, OH 44321
Phone: 330/666-8121
Fax: 330/666-8340
Email: TireandRim@aol.com
+++
pardal (Automotive) Nov 11, 2001
I found all this data about Tire and Rim.
The Tire and Rim Association, Inc.
175 Montrose West Avenue
Suite 150
Copley, OH 44321
Phone: 330/666-8121
Fax: 330/666-8340
Email: TireandRim@aol.com
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
