Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

What's the 'best' and 'proper' way...

Status
Not open for further replies.

Nella95

Mechanical
Joined
Nov 21, 2005
Messages
400
Location
US
to demonstrate another configuration of a component in an assembly?

Say I've got one configuration, with a component oriented one way, and another configuration with the same component oriented in the opposite direction.

different configurations of the component, or different configurations of the assembly. Does it even matter?
 
If you want to switch part configurations (i.e. part changes shape), you likely also need to have different configs in the assembly.

If the part is the same and all you need is different positions, do it all at the assembly level.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top