Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

What's a good distance-learning MSEE program for Power?

Status
Not open for further replies.

PE56

Electrical
Jul 17, 2009
6

Could someone recommend a good distance learning program by a well known accredited university in the US for a Master's Degree in Electrical Power? Classes are sent via web or DVD, etc. I've looked at Kansas State University's and the University of South Florida's? Have you heard any comments about either program? Good comments about any other? I'm trying to choose a good university and program and would appreciate your feedback.
 
Replies continue below

Recommended for you

PE56, this is my personal opinion & others may disagree, but I believe that one of the best is through the University of Idaho. They have an engineering outreach program that will allow you to get your MSEE in power without ever stepping foot on campus. I have completed 15-hours thus far & I live on the other side of the U.S.

SEL/Schweitzer is in their back-yard (per say) so you get a lot of guest speakers in classes that are actually doing power engineering jobs.

Wherever you decide to go, good luck!
 
When I went through my power courses in grad school a few years ago, I often referred to the material on course web pages by Dr. Bruce Mork at Michigan Tech University. It turns out they offer an online MSEE. I would recommend checking it out. Here's a link:

xnuke
"Live and act within the limit of your knowledge and keep expanding it to the limit of your life." Ayn Rand, Atlas Shrugged.
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.
 
I'll second the U of I recommendation. Just finished my MEEE (Master of Engineering, Electrical Engineering) concentrating on Power System Protection. The ME is a non-thesis degree (30 semester credit units) while the MS is a thesis degree (24 semester credit units plus 6 or more units of thesis preparation). Trying to earn the degree while working full time it is best to take the ME path rather than the MS path. One course per term means a 5 year program; again about the maximum load you'd want to take on while working full time.
 
davidbeach, Congrats on the MEEE! I agree 1 class/semester + full time job = very busy engineer (plus my son was 2 months old when ECE504-AP started) = very tired daddy! LOL!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor