Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

What would be a good drafting refre

Status
Not open for further replies.
helpmewithintralink

helpmewithintralink

Automotive
Joined
Mar 30, 2001
Messages
89
Location
CA
What would be a good drafting refrence book for ISO?
It has to be cheap :) 8-)
 
Sort by date Sort by votes
have you looked into Global Standards or ANSI Y14.5M? They are the most widely used standards in the drafting/design field. I am not sure if they are covered by ISO, but they might help.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Ganeshrnair9
  • Locked
  • Question Question
ISO standard for welding procedure and welder qualification on Alu Zinc coated steel sheet
Replies
1
Views
1K
kingnero
kingnero
spray_arc
  • Locked
  • Question Question
ISO 3834 and EN 1090 Certifications for EURCODE 3
Replies
3
Views
1K
kingnero
kingnero
O.Rezzik
  • Locked
  • Question Question
Clarification for ISO 6892 Annex E - E.2.2 Longitudinal or transverse strip
Replies
0
Views
768
O.Rezzik
O.Rezzik
spray_arc
  • Locked
  • Question Question
ISO 15614 Level 2 and ISO 9606
Replies
1
Views
1K
kingnero
kingnero
TED7
  • Locked
  • Question Question
Metric threads - ISO 965-1 and BS 3643
Replies
0
Views
999
TED7
TED7

Part and Inventory Search

Sponsor

Back
Top