Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

What should be the allowable bendin

Status
Not open for further replies.
John121

John121

Mechanical
Joined
Jun 23, 2020
Messages
13
Location
JP
What should be the allowable bending stress for non pressure carbon steel attachment(e.g platform ladder cleats)
vendor has taken 0.9 of yield stress but I am insisting him to 0.66 of yield stress AISC manual.
 
Status
Not open for further replies.

Similar threads

mechengineer
  • Question Question
Does MDMT can be lower than the impact test temperature indicated in AMSE code?
Replies
8
Views
5K
r6155
r6155
enginesrus
  • Locked
  • Question Question
What brass or bronze for water couplings?
Replies
9
Views
6K
Brooke William
B
PRjuventus
  • Locked
  • Question Question
Interpreting of "thickness is the minimum dimension of the heaviest section"
Replies
0
Views
1K
PRjuventus
PRjuventus
V
  • Question Question
Determining the Fracture Mode: Brittle Fracture vs. Fatigue in a Pump Shaft
2
Replies
21
Views
21K
mfgenggear
mfgenggear
Stephen.Scott
  • Locked
  • Question Question
Material to outlive the Giza Pyramids
Replies
14
Views
4K
A M Contractor
A M Contractor

Part and Inventory Search

Sponsor

Back
Top