DynamicFlow
Mechanical
I am wondering what the common used references are for aerospace engineers and what are good books to learn the basics from? Is Aerodynamics, Aeronautics, and Flight Mechanics by Wiley McCormick a good starting book?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
What references do you use for aerospace
- Thread starter DynamicFlow
- Start date
- Status
DynamicFlow (Mechanical),
Based on your handle, and your text book choice, I would assume your area of interest is in aerodynamics of aircraft.
That would be a good starting point, I am sure there are other textbooks as good, but if self-starting, that should work.
As IRstuff stated, for aerospace engineers, it runs the whole spectrum. To work in the aerospace industry, the only specialty I can think of that would not be used is .... nope can not think of one.
Based on your handle, and your text book choice, I would assume your area of interest is in aerodynamics of aircraft.
That would be a good starting point, I am sure there are other textbooks as good, but if self-starting, that should work.
As IRstuff stated, for aerospace engineers, it runs the whole spectrum. To work in the aerospace industry, the only specialty I can think of that would not be used is .... nope can not think of one.
Yeah, Aerospace is a broad field. That books a good choice, we used it when I was at school and I've looked back at it a few times since.
If you're interested in Design, take a look at Dan Raymers book
It was the book used for our aircraft design course by the same prof, one of our few who had actually worked in Aerospace.
KENAT, probably the least qualified checker you'll ever meet...
If you're interested in Design, take a look at Dan Raymers book
It was the book used for our aircraft design course by the same prof, one of our few who had actually worked in Aerospace.
KENAT, probably the least qualified checker you'll ever meet...
IR - Don't take offense to this comment, but my pops often uses the word nebulous. Often in such a chiding way that you feel only three or four inches tall.
Wes C.
------------------------------
No trees were killed in the sending of this message, but a large number of electrons were terribly inconvenienced.
Wes C.
------------------------------
No trees were killed in the sending of this message, but a large number of electrons were terribly inconvenienced.
Off to your room!
None taken. I had a boss, whom I hated, say once, that even a resistor is a complex system to the resistor engineer. And surely, there are no "simple" planes anymore.
All I wanted to point out is that landing gear engineer, particularly one specializing in carrier landings, would have totally different set of reference materials than a wing designer. Much more wordy than "nebulous," don't cha think?
TTFN
FAQ731-376
None taken. I had a boss, whom I hated, say once, that even a resistor is a complex system to the resistor engineer. And surely, there are no "simple" planes anymore.
All I wanted to point out is that landing gear engineer, particularly one specializing in carrier landings, would have totally different set of reference materials than a wing designer. Much more wordy than "nebulous," don't cha think?
TTFN
FAQ731-376
DynamicFlow, hopefully none of the light hearted ribbing/chastizement has offended you.
Do you have an area you want to specialize in?
From your handle I'd be tempted to assume aerodynamics but we know what assuming does;-).
Was my course text in second year, I'm not sure I've really used it since but again, that's a function of what I've done in my career.
KENAT, probably the least qualified checker you'll ever meet...
Do you have an area you want to specialize in?
From your handle I'd be tempted to assume aerodynamics but we know what assuming does;-).
Was my course text in second year, I'm not sure I've really used it since but again, that's a function of what I've done in my career.
KENAT, probably the least qualified checker you'll ever meet...
- Thread starter
- #9
DynamicFlow
Mechanical
I think all the comments are great. Thank you everyone so far. My question is rather general and the reason for that is I am interested in getting into the aerospace field in a number of years though I don't know where I want to be in it. I think my interests at the moment are aerodynamics, aircraft design, and propulsion. I also have enjoyed learning a little about stealth technology so if there is any quality literature about stealth technology please let me know.
While it's getting long in the truth there used to be a STANAG that addressed stealth.
I seem to recal my prof (who'd been one of the leads on B2) calling it the no see 'em.
We used it while working our group design project.
KENAT, probably the least qualified checker you'll ever meet...
I seem to recal my prof (who'd been one of the leads on B2) calling it the no see 'em.
We used it while working our group design project.
KENAT, probably the least qualified checker you'll ever meet...
Just received this AIAA aircraft design book for Xmas.
Haven't gotten too far into it yet, but it seems like a good place to learn a little more about all the different aspects of aerospace engineering.
Haven't gotten too far into it yet, but it seems like a good place to learn a little more about all the different aspects of aerospace engineering.
Young Turk, That's the book I recomended in my first post.
It's not really the sort of book you'd just want to sit down and read to find out more though, it basically takes you through the initial design of an aircraft, it's ideal for design projects at Uni etc.
A good general book is Mechanics of Flight by Barnard & Philpott Not much detail but you could sit down and read it just out of interest. I lost mine to an apprentice at my first employer, that'll teach me to lend from my personal library!
KENAT, probably the least qualified checker you'll ever meet...
It's not really the sort of book you'd just want to sit down and read to find out more though, it basically takes you through the initial design of an aircraft, it's ideal for design projects at Uni etc.
A good general book is Mechanics of Flight by Barnard & Philpott Not much detail but you could sit down and read it just out of interest. I lost mine to an apprentice at my first employer, that'll teach me to lend from my personal library!
KENAT, probably the least qualified checker you'll ever meet...
Sorry, don't always have time to hit every link while posting from work at break time. I guess I have a somewhat high tolerance for pain when it comes to reading something I think I'll learn from.YoungTurk, I wasn't slapping your wrist, sorry if I sounded like that. My point was that as I recall (been a while since I looked at it) to get the best benefit from it you'll probably want to run some of the calculations/do your own design rather than just read the explanations etc.
KENAT, probably the least qualified checker you'll ever meet...
KENAT, probably the least qualified checker you'll ever meet...
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question