Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

What is the allowable increase in BFE- LOMR

Status
Not open for further replies.
biker317

biker317

Civil/Environmental
Joined
Mar 14, 2008
Messages
13
Location
CA
I am seeing a couple of answers in the NFIP FAQ...If the LOMR is for a previous study that already has a floodway then the allowable increase is 0.00 foot. However, if the previous study has no floodway then the allowable increase is 1.0 foot (if allowed by local ordinance)?
Is this a correct conclusion, can someone please verify (and a link maybe?)..much appreciated!
 
Status
Not open for further replies.

Similar threads

JEawb
  • Question Question
Oscillations and Equalizing in Hydrocad
Replies
2
Views
5K
zelgar
zelgar
meatymatt
  • Locked
  • Question Question
4" Loamy Sand over 6'+- Sandy Clay Loam - What rate should you use for drawdown?
Replies
2
Views
10K
swazimatt
swazimatt
D
  • Locked
  • Question Question
Dekalb Method Model in HydroCAD
Replies
5
Views
7K
psmart
psmart
wesman07
  • Question Question
Help understanding a theory
Replies
6
Views
14K
zelgar
zelgar
wesley_pipes
  • Locked
  • Question Question
Calculating capacity in ditch section with uphill slope
Replies
2
Views
2K
FacEngrPE
FacEngrPE

Part and Inventory Search

Sponsor

Back
Top