Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
what is standard for design wash tanks
- Thread starter Rafa58
- Start date
BEMPE16524
Mechanical
1. Baffle Spacing and Number: ...
2. Baffle Width: ...
3. Baffle Placement: ....
4. Standards and Guidelines: ....
5. Special Considerations: ....
If the wash tank has heating or cooling elements, the baffle spacing may need to be adjusted to ensure uniform temperature distribution.
The fluid properties, such as viscosity and density, can also influence the optimal baffle design.
Consulting relevant standards (such as API 650 for tanks or ASME codes) or working with a tank design engineer can help ensure that the baffle design meets the specific needs of your application.
R.Efendy
2. Baffle Width: ...
3. Baffle Placement: ....
4. Standards and Guidelines: ....
5. Special Considerations: ....
If the wash tank has heating or cooling elements, the baffle spacing may need to be adjusted to ensure uniform temperature distribution.
The fluid properties, such as viscosity and density, can also influence the optimal baffle design.
Consulting relevant standards (such as API 650 for tanks or ASME codes) or working with a tank design engineer can help ensure that the baffle design meets the specific needs of your application.
R.Efendy
- Status
Similar threads
- Locked
- Question
- Question
- Question