curiousinvite
Civil/Environmental
what is direction 1 and 2?
Is it X and Y axis ?
what about the spacing shown above, Is it parallel to 1 direction(X axis)?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
What is direction1 and direction 2? 1
- Thread starter curiousinvite
- Start date
- Status
what is direction 1 and 2?
Is it X and Y axis ?
what about the spacing shown above, Is it parallel to 1 direction(X axis)?
-
1
- #2
JoshPlumSE
Structural
Go to View - Set Display Options.
On the Objects tab, there is a section titled Shell Assignments. Check the box that says "local axes". That should allow you to see the local axis direction for your slab.
I hope that helps!!
On the Objects tab, there is a section titled Shell Assignments. Check the box that says "local axes". That should allow you to see the local axis direction for your slab.
I hope that helps!!
- Status
Similar threads
- Question
- Question
- Locked
- Question
- Locked
- Question
