What file to be modified to change assign hot keys to commands

[CAD Application Support]

Hi All,

I wondering which file to be edited to get the commands associated with hot keys. for example I want to use F11 for invoking the measurement command.

I thought its ugmain file. But Iam was not sure..

 

[Arkance/PhoeNX]

Tools -> Customise, then click on the Keyboard Button at the bottom of the Customise dialog.

You can then edit hotkeys.

Anthony Galante
Senior Support Engineer


NX4 to NX CR with almost every MR (18versions)

 

[CAD Application Support]

Hi Anthony,

Iam aware of how I can do that. But if I want it to be globally available, so that when ever any designer launches the NX application, these hotkeys work for them. Especially for Show and Hide commands, OOTB is holding down couple of keys to invoke the tool. I can map it to some function keys or alpha key .

 

[Arkance/PhoeNX]

Customise the way I suggested & then exit NX.

You can then copy the user.mtx file from C:\Users\username\AppData\Local\Siemens\NX1899 to the equivalent folder on another system.


Anthony Galante
Senior Support Engineer


NX4 to NX CR with almost every MR (18versions)