Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
What Does ISS Stands For? 1
- Thread starter mmbguide
- Start date
-
1
- #2
Hi
THRD (Threaded)NPT (National Pipe Thread) UB (Union Bonnet) - SG (Solid Gate) - ISS.
ISS might be interpreted as Inside Screw Stem (Stem and Solid Gate/Wedge connected by means of thread) OR Internal Socket Seal (after the last thread of NPT, located some kind of O-Ring with function to act as primary Seal).
Better ask the originator who issue this inquiries to you. It would do no harm to ask since this abbreviation is not quite common, and usually used for SAP/database input
Regards,
MR
All valves will last for years, except the ones that were poorly manufactured; are still wrongly operated and or were wrongly selected
THRD (Threaded)NPT (National Pipe Thread) UB (Union Bonnet) - SG (Solid Gate) - ISS.
ISS might be interpreted as Inside Screw Stem (Stem and Solid Gate/Wedge connected by means of thread) OR Internal Socket Seal (after the last thread of NPT, located some kind of O-Ring with function to act as primary Seal).
Better ask the originator who issue this inquiries to you. It would do no harm to ask since this abbreviation is not quite common, and usually used for SAP/database input
Regards,
MR
All valves will last for years, except the ones that were poorly manufactured; are still wrongly operated and or were wrongly selected
- Thread starter
- #3
- Status
Similar threads
- Question
