Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Wetting Agent as Means to Prevent Water Strip Out and MIC

Status
Not open for further replies.

Corroneer

Mechanical
Joined
Jan 13, 2006
Messages
63
Location
SA
Hi Everyone,

Has anyone got any experience of using oil wetting agents to prevent water from stripping out from oil/crude and hence preventing MIC? Any references is well-appreciated.

Regards,
Corroneer
 
The next guy down the line may not appreciate the added difficulty of stripping the chemically emulsified water. There are additives that will prevent microbial growth without emulsifying the water. Amerstat 25 from Drew Marine comes to mind.
 
What make you believe that some microorganisms initiating MIC do not also come from the oil? especially crude one!

* Finding a solution is great * Knowing how to implement it is fantastic * Believing it is the only one and best is naive ?
 
Microbes tend to live at the interface if of the oil and water. They eat the oil but can't live in it. Remove the interface and you won't get microbes.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top