Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

WET STANDPIPE SIZING

Status
Not open for further replies.
murtazakhan

murtazakhan

Mechanical
Joined
Dec 17, 2014
Messages
4
Location
SA
HI everyone

If i have G+4 Building and have 2 1/2'' FHC 6 nos at 4th floor, 3 at 3rd floor and 5 on each 1st and ground floor then what will be the size of individual branches to each floor and of the main riser. the system is of wet standpipe. Plz attached reference tables as well.
 
Sort by date Sort by votes
You should hire the services of a fire protection engineer as it appears that your question is outside your capability since many elements needed to size the standpipe are not mentioned in your OP.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Mike Cole
  • Locked
  • Question Question
Standpipe Design History
Replies
3
Views
577
cdafd
cdafd
jjmoore73
  • Locked
  • Question Question
Fire Pump Sizing
Replies
5
Views
1K
UFT12
UFT12
R
  • Locked
  • Question Question
Domestic meter sizing for combined domestic/fire sprinkler system
Replies
10
Views
9K
Danefre
Danefre
Matt B NSE
  • Locked
  • Question Question
NFPA 13-2013 / NFPA 14-2013 Combination dry sprinkler standpipe/riser question
Replies
4
Views
1K
cdafd
cdafd
GlorifiedPlumber1984
  • Locked
  • Question Question
Horizantal Standpipe Hose Valves
Replies
2
Views
554
GlorifiedPlumber1984
GlorifiedPlumber1984

Part and Inventory Search

Sponsor

Back
Top