Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Wet air added to Dry air with SiCl2

Status
Not open for further replies.
jppmj

jppmj

Chemical
Joined
Feb 24, 2003
Messages
15
Location
FR
I have to mix 750 m3/h dry air (water 0%)@ 60°C with 750 m3/h water saturated air @ 30°C. How to avoid plugging due to SiO2 (from reaction beetween SiCl4 and H2O) + Water.
The pipes and vessel are in PVC.
Thank You
JPPMJ
 
Status
Not open for further replies.

Similar threads

R
  • Question Question
Wet scrubber - what happens if you continue to re-circulate a scrubbing liquid?
Replies
13
Views
13K
georgeverghese
georgeverghese
HotPotato
  • Locked
  • Question Question
Ammonia Tuning for Injections Rates to the Ammonia Injection Grid
Replies
1
Views
302
mbt22
mbt22
rahulsb
  • Locked
  • Question Question
Nitrogen Purging to open vent tank
Replies
7
Views
569
guerky
guerky
nsalhieh
  • Locked
  • Question Question
H2S removal from air stream
Replies
9
Views
409
bimr
bimr
pid3control
  • Locked
  • Question Question
Is there any single kinetic model relating bioremediation rate to temperature, pH, Depth & Nutri
Replies
3
Views
313
zelgar
zelgar

Part and Inventory Search

Sponsor

Back
Top