Weldment Profile Problems

[je696763]

I am haveing a lot of problems with getting my weldment profiles to work when adding a structural member. I have created a folder system like this:
Weldment Profiles/ANSI/Square Tube. Under Square Tube, I have two different parts that I saved as libray features. One is called 3 x 3 x 11 Ga.sldlfp, and the other is 2 x 2 x 11 Ga.sldlfp. When I go to create a structural member, they do not show up. Then I decided to add one of the default folders to see if it worked, so I copied the folder Rectangular Tube under Solidworks/Data/Weldment Profiles, and copied it under the Weldment Profiles/ANSI directory. The wierd thing is that when I go to create the struct. member, I see ANSI under the Standard selection, I can go to either rectangular tube or square tube under the Type selection, but either way I get the profiles of the rectangular tube under the Size selection. Even if I have Square tube selected as the type. Before I copied rectangular tube to this folder I didn't see anything in the size box. I'm using SW 2005 SP1.1. Anybody have any ideas as to what is going on?

 

[je696763]

I got it working, it had something to do with the file name square tube I guess. I could move my files to the rectangular tube folder and they would work. I just renamed the square tube folder to sq. tube and then the files showed up in that one also. Not sure why, but at least its working now.

 

[SBaugh]

http://www.scottjbaugh.com/Tips_Tricks/Custom_Weldment_Profiles.htm

Regards,

Scott Baugh, CSWP
3DVision Technologies

http://www.3dvisiontech.com

http://www.scottjbaugh.com

faq731-376
faq559-716 - SW Fora Users