Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Weldment Acceptance Criteria 1

Status
Not open for further replies.
JAlton

JAlton

Mechanical
Joined
Jan 19, 2003
Messages
227
Location
US
I have a customer who wants Weldment Acceptance Criteria for weld repairs to Gate, Globe & Check valves. I have loked at ASME Sec. V (NDE) & Sec. IX (Welding), but I am not familiar with these documents. I would like input regarding the issue of Weldment Acceptance Criteria. Any help would be much appreciated.

JAC
 
Sort by date Sort by votes
Normally, welding and acceptance criteria for valves is in accordance with ASME Section VIII, Div 1 requirements. The basis for this is ASME B16.34, "Valves - Flaned, Threaded and Welding End", See section 8.4 in B16.34.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

JONI101
  • Locked
  • Question Question
AWS D1.1 : 10.25.2 - Tubular Connection Requirement (RT acceptance criteria)
Replies
0
Views
1K
JONI101
JONI101

Part and Inventory Search

Sponsor

Back
Top