Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Welding tube SA 213 T22 with tube S

Status
Not open for further replies.
ritsa p

ritsa p

Mechanical
Joined
Aug 19, 2021
Messages
7
Location
GR
Welding tube SA 213 T22 with tube SA 213 T22 WITH DIMENSIONS 44.3X7.8 mm, according to ASME min. preheat is 150 celsius. My question is
preheat should be done with propane or with heating media in order to maintained?
 
Sort by date Sort by votes
Electric so that proper record could be maintained in the form of pre-heat chart.
Propane (referring to gas torch maybe and usong temperature chalks) is less accurate and you cannot have any record.

DHURJATI SEN
Kolkata, India


 
Upvote 0 Downvote
We used torch preheating with this grade of tubes nearly 100% of the time. Different story for T91 tubes.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

E
  • Question Question
Pressure and thermal stressors in a tube
Replies
7
Views
8K
SnTMan
SnTMan
Crude_Eng
  • Locked
  • Question Question
SMR Waste Heat Boiler Tube Failure
Replies
2
Views
3K
Dhurjati Sen
Dhurjati Sen
FPPE
  • Locked
  • Question Question
Applicability of SA-788 S12 for SA-182 F316 HUBBED TUBESHEET
Replies
0
Views
1K
FPPE
FPPE
FPPE
  • Locked
  • Question Question
SA-182 VS SA-965 for heat exchanger tubesheets and girth flanges
Replies
14
Views
7K
r6155
r6155
KBO_BC
  • Locked
  • Question Question
Tube to Tubesheet Strenght welds
Replies
7
Views
2K
KBO_BC
KBO_BC

Part and Inventory Search

Sponsor

Back
Top