Mar 27, 2014 #1 Cmott Aerospace Joined Jun 2, 2005 Messages 10 Location US Welding symbols are not showing correctly. Using AWS, there is no symbol for melt-thru and the flange corner is upside down. Melt-thru is suppose to be a solid filled half moon, they only show up unfilled. Any way to correct this? using NX7.5
Welding symbols are not showing correctly. Using AWS, there is no symbol for melt-thru and the flange corner is upside down. Melt-thru is suppose to be a solid filled half moon, they only show up unfilled. Any way to correct this? using NX7.5
Mar 27, 2014 #2 jerry1423 Mechanical Joined Aug 19, 2005 Messages 3,428 Location US You may not have it set correctly in your customer defaults: File -> utility -> customer defaults and then what I did is I enetered weld symbol in the binoculars, and then look for something in the Standard catagorey Upvote 0 Downvote
You may not have it set correctly in your customer defaults: File -> utility -> customer defaults and then what I did is I enetered weld symbol in the binoculars, and then look for something in the Standard catagorey