I would like to know the best recommended filler metal, interpass temperature, and availability of the recommended filler metal. I have read that ER80s-Ni3 is recommended but am not sure its availabilty. I have also read filler metals from ERNiCrMo-3, 4, ER309L, ER310 are also recommended. My service is to -100F to 350F. PLease help!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
welding SA-203 type E
- Thread starter trceng1
- Start date
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
