Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Welding Qualification ranges AWS D1.3

Status
Not open for further replies.
cjevans

cjevans

Structural
Joined
Feb 17, 2014
Messages
4
Location
US
Correct me if I'm wrong but in regards to AWS D1.3 if you can weld 12 gauge steel to a 1/2" steel embed plate then you are qualified to weld anything thinner than 12 gauge (14,16,18,20 etc.)....

Also, if you can weld that 12 gauge to the 1/2" steel embed plate then you are qualified to weld 12 gauge to 3/8",1/4" etc...

 
Status
Not open for further replies.

Similar threads

I
  • Solved
Hardfacing overlay welding - Procedure qualification
Replies
5
Views
9K
ilkerdburhan
I
Cormet
  • Question Question
Dissimilar Metal Weld Qualification
Replies
5
Views
2K
David3399
D
mrmalcolm
  • Locked
  • Question Question
Does the welder for Welding Process Qualification testing Be Qualified?
Replies
6
Views
3K
gtaw
gtaw
mrmalcolm
  • Locked
  • Question Question
Range of filler material for welding procedures qualification in ISO 15614-1
Replies
3
Views
3K
kingnero
kingnero
Engingeeer
  • Question Question
nut welding fixture
Replies
2
Views
13K
Engingeeer
Engingeeer

Part and Inventory Search

Sponsor

Back
Top