Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Welding Qualification ranges AWS D1.3

Thread starter cjevans
Start date Feb 18, 2014

Status: Not open for further replies.

Feb 18, 2014

cjevans

Structural

Correct me if I'm wrong but in regards to AWS D1.3 if you can weld 12 gauge steel to a 1/2" steel embed plate then you are qualified to weld anything thinner than 12 gauge (14,16,18,20 etc.)....

Also, if you can weld that 12 gauge to the 1/2" steel embed plate then you are qualified to weld 12 gauge to 3/8",1/4" etc...