Mohamedhassanmido
Materials
THERE IS PIPELINE OF MATERIAL API 5L GR B AND WE WANT TO CHANGE SOME OF PIPES BUT WE HAVE PIPES API 5L X52 ONLY, CAN WE USE IT? WHAT ABOUT WELDING OF PIPES WITH DIFFERENT STRENGTH ?
Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
WELDING PIPES WITH DIFFERENT STRENGTH
- Thread starter Mohamedhassanmido
- Start date
- Status
LittleInch
Petroleum
So long at they are the same thickness at the weld end, this is not an issue. you will probably need a specific weld procedure and weld qualification tests as this could be an essential variable, but talk to welding engineer to see if your current welding procedures are valid or not. If not it's not a big cost to get ones that are.
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
- Status
Similar threads
- Question
