Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

WELDING OF SS316L plug with DUPLEX tubes

Status
Not open for further replies.
khalidkhattak

khalidkhattak

Mechanical
Joined
Aug 27, 2002
Messages
22
Location
PK
CAN WE USE SS316L PLUGS TO WELD ON A-789 S31803? FOR WELDING WHAT FILLER WIRE TO BE USED? CAN WE USE ER-2209?
INFORMATION WOULD BE APPRECIATED.
REGARDS
 
Sort by date Sort by votes
Use ER-2209 filler metal for joining the plug to the tube. Keep the interpass temperature during welding below 350 deg F. No preheat, and no PWHT.
 
Upvote 0 Downvote
Are you welding the plug to the tube, or to the tubesheet, and if the tubesheet, what is the tubesheet (or tubesheet overlay if any) material?

rmw
 
Upvote 0 Downvote
THANKS metengr..thats what i was expecting...
RMW.. The welding of the plug is on tube seal welds. We do not touch tubesheet for welding purpose..
THANKS again
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Rakesh Ahluwalia
  • Locked
  • Question Question
MIG welding of Tube SA213 T23 with Fin SA387 Gr 22
Replies
0
Views
323
Rakesh Ahluwalia
Rakesh Ahluwalia
wontweldcantweld
  • Locked
  • Question Question
42CrMoV forgings - welding variables
Replies
2
Views
686
WKTaylor
WKTaylor
bekks
  • Locked
  • Question Question
Sigma phase in 2205 duplex
Replies
8
Views
861
EdStainless
EdStainless
pete73
  • Locked
  • Question Question
Welding 310 stainless steel with ER308/308L
Replies
4
Views
2K
bekks
bekks
MichaelW.
  • Locked
  • Question Question
Welding Duct Work
Replies
4
Views
627
gtaw
gtaw

Part and Inventory Search

Sponsor

Back
Top