welding machine to weld 0.2 to 0.5mm thick sheets in SS316

[ciddik]

hi everybody

can anyone help me to select the welding m/c to weld metallic plate of 0.2 to 0.5mm thick ss316 plates radially

I know it is done through TIG welding m/c, but I m searching for actual configuration.

plz help

thanks

siddik

 

[Dinosaur]

I would have thought welding material this thin would be done with either spot resistance welding or seam resistance welding.

 

[MintJulep]

Or laser.

 

[unclesyd]

Here are two suppliers of Micro-Tig and Micro-Plasma welding machines that I'm familiar with. Your requirements are well within the capabilities of either companies machines.
A good setup and working environment is essential in getting good micro welds. What little freehand work we accomplished an elbow support and stereo microscope were the essential aids.

I would check and see if either company has a video.

http://www.pro-fusiononline.com/

http://www.weldlogic.com/

 

[ciddik]

unclesyd, thanks you, i found one with weldlogic

siddik