Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Welding guideline for SA 335 p22

Status
Not open for further replies.

UWMechEng10

Mechanical
Joined
Jun 20, 2008
Messages
2
Location
CA
I am wondering if there is a guideline available for fabrication and welding of SA 335 P22 carbon steel
 
Guideline for fabrication is based on the application for this material - for example boiler/pressure vessels ASME B&PV Code. This code gives rules for fabrication and welding. For piping, go to the ASME Power Piping Codes.
 
AWS Welding Handbook Vol 4, 8th Edition

You may also get better replies if you post in the Welding Bonding & Fastener Engineering Forum particularly as the material of interest is not a stainless steel!

Steve Jones
Materials & Corrosion Engineer
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top