Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Welding curb angle and wind girder

Status
Not open for further replies.

Syahar1975

Mechanical
Joined
Feb 3, 2011
Messages
224
Location
ID
Dear experts,

We have an open top tank with curb angle and wind girder on the top shell course.

The erection would be by jacking method so the top shell course will be the first one to be erected.

I have a concern about fit up and weld the curb angle and wind girder. Which one should be the first one ? Fit up and weld curb angle then fit up and weld wind girder or the other way around or other method.

Syah
 
I recommend first weld the top angle, then the wind girder.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top