Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Welding ASTM A606

Status
Not open for further replies.
BATman2

BATman2

Mechanical
Mar 22, 2002
43
In the A606 specification two conditions are noted for this steel, "as-rolled" and annealed; the mech. properties of annealed are about 10% less than as rolled. I am concerned that welding as-rolled material alters the properties to the annealed values in the HAZ. Does anyone know if this is true?

BATman2

 
Replies continue below

Recommended for you

Sort by date Sort by votes
Don't worry. Welding of hot rolled A-606 will not "anneal" the HAZ to the lower strength of annealed A-606.

 
Upvote 0 Downvote
Stanweld,

Thanks. What's curious is why AWS D1.1 only reports the annealed values for A606 in the material tables.
 
Upvote 0 Downvote
AWS D1.1 is simply giving the minimum strength of A-606 since there are no "grade" designations.

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Karik87
  • Locked
  • Question
Filler Metal for welding of ASTM B148 C95800 1
Replies
8
Views
937
bruv
bruv
SAEEDGH
  • Question
stud welding manufacture process
Replies
3
Views
284
mfgenggear
mfgenggear
N
  • Locked
Welding Rimming Steel
Replies
14
Views
6K
dik
dik
krus1972
  • Locked
  • Question
Repair Welding Under Load
Replies
2
Views
3K
weldstan
weldstan
dik
  • Locked
  • Question
Welding Electrode for Corten Steel 4
Replies
14
Views
5K
dik
dik

Part and Inventory Search

Sponsor

Back
Top Bottom