I recieved some 4140 pins that needed tabs welded on the ends,tabs are 572 material. I pre-heated the pins to 450 degrees and air cooled in room temp. The tabs are breaking off in the field. Should the tabs be welded on and then harden the pins to prevent this,,, or what?????Thank you.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
welding 4140,parts breaking
- Thread starter glenncad
- Start date
- Status
Similar threads
- Solved
