Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

welding 3/4" duplex steel ( 2205) impact test @-30°c

Status
Not open for further replies.
stan000

stan000

Mechanical
Joined
Jul 31, 2014
Messages
121
Location
CA
hello friends
i am using my impact test welding procedure for 3/4" shell thickness do i have to still need production run off plates for
cat A & cat B. & do i need ferrite content examination on my weld procedure.
please advice.
 
Status
Not open for further replies.

Similar threads

EdClymer
  • Question Question
Wind code DIN 1055 part 4
Replies
0
Views
1K
EdClymer
EdClymer
C
  • Question Question
API 650 Annex S (S.4.14.2 C)
Replies
2
Views
4K
r6155
r6155
Ahmed Habashy
  • Locked
  • Question Question
Welding attachments after hydrotest
Replies
5
Views
3K
Ahmed Habashy
Ahmed Habashy
GOSP75
  • Question Question
Regarding shell to curb angle welding category and NDT requirement
Replies
8
Views
12K
r6155
r6155
Clasan
  • Locked
  • Question Question
Ultrasonic thickness testing on steel tanks
Replies
3
Views
2K
zelgar
zelgar

Part and Inventory Search

Sponsor

Back
Top