My company produces specialist thermocouples comprising of precious metals. My problem is how best to weld 2 wires of 0.3mm dia, inside a small tube with an inside diameter of 1.0mm. The weld needs to be accurate on the tips of the wires. They are set around 20mm deep inside the tube. Any ideas?? We currently use capacitance welding, we are looking to upgrade either this method or to find another.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
welding 2 fine wires inside end of small tube, capacitance welding? 1
- Thread starter groover
- Start date
-
1
- #2
groover,
I have absolutely no practical experience with this sort of thing - though i think that electronic components are typically welded using ultrasonic welding. You can follow this link as a starting point:
hope this helps.
I have absolutely no practical experience with this sort of thing - though i think that electronic components are typically welded using ultrasonic welding. You can follow this link as a starting point:
hope this helps.
- Status
Similar threads
- Solved
