Weld estimating

[rymojo]

Who makes the best welding estimating software or book for pipe and structural welding in powerplant, especially nuclear, environments.

 

[Goahead]

Chapter 12 "Economics of Welding and Cutting" from the AWS Welding Handbook Vol. 1 Ninth Edition is probably one of the best references available on the subject.

http://www.welding-advisers.com/

 

[pipewelder1999]

Check out this one .

http://www.mruczekweldingengineering.citymax.com/page/page/2953669.htm

I have a very basic prograam for comparing process costs side by side and estimating weld joint volumes at

http://www.weldinginspectionsvcs.com/weldassist_version_2.htm

There are some links to some welding related software companies at

http://www.weldinginspectionsvcs.com/otherPeoplesWeldingSoftware.htm

. You may also be able to contact on of them and see if they have anything in the works.

Hope this helps

Gerald Austin
Iuka, Mississippi

http://www.weldinginspectionsvcs.com