Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Weight and Mass Information - NX12
- Thread starter 4mranch6
- Start date
Are they all in the same Assembly?
You first need to make sure, in the properties of each component, that the "Update Data on Save" is checked.
Then you can see, in your assembly, the total weight of your structure.
Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX9 / TC10.1.2
Building new PLM environment from Scratch using NX12 / TC11
You first need to make sure, in the properties of each component, that the "Update Data on Save" is checked.
Then you can see, in your assembly, the total weight of your structure.
Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX9 / TC10.1.2
Building new PLM environment from Scratch using NX12 / TC11
- Status
