Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Web page articles and copyrights 1
- Thread starter buzzp
- Start date
-
1
- #2
Buzzp,
I'm not certain what country you're in, but in the U.S. you can go to the web page and get a wealth of really good information. One thing I found out there last week is that you don't have to actually register a copywright for it to be in force in the U.S. If you do register it (with a form, a copy of the work, and a $30 check) then if you are infringed, sue, and win you are possibly entitled to a bigger settlement (things like lawyers fees and punitive damages come to mind).
Read the FAQ and see what is required. For protection against actual damages the requirements are pretty easy.
You'd have to ask a competent lawyer about the value of the EULA language that no one reads during every install. The advice I got was not very favorable about them.
David Simpson, PE
MuleShoe Engineering
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
I'm not certain what country you're in, but in the U.S. you can go to the web page and get a wealth of really good information. One thing I found out there last week is that you don't have to actually register a copywright for it to be in force in the U.S. If you do register it (with a form, a copy of the work, and a $30 check) then if you are infringed, sue, and win you are possibly entitled to a bigger settlement (things like lawyers fees and punitive damages come to mind).
Read the FAQ and see what is required. For protection against actual damages the requirements are pretty easy.
You'd have to ask a competent lawyer about the value of the EULA language that no one reads during every install. The advice I got was not very favorable about them.
David Simpson, PE
MuleShoe Engineering
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
Theophilus
Mechanical
People will use what they like anyway. Make sure you don't post info that would compromise proprietary information. You really won't have control of what people do with what you post and will probably find prosecution totally infeasible.
Jeff Mowry
Industrial Designhaus, LLC
Jeff Mowry
Industrial Designhaus, LLC
- Thread starter
- #4
You retain your copyright even if you don't put the usual "Copyright 2004 John Doe" at the bottom of your page, but you should. You may want to add an explicit "Article reprint fee $500" notice.
Rob Campbell
Rob Campbell
- Status
Similar threads
- Question
