Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

weather resistant plastic films for lamination?

Status
Not open for further replies.

SolarWeenie

Mechanical
Jun 19, 2003
7
Hi,

We are looking for a weather (including UV) resistant, flexible polymer film to be laminated to extruded polystyrene foam. Desired service life is ~30 years. Tall order, I know. To date we have identified the following candidates:

1.5 mil bondable Tedlar.
Roofing membranes such as TPO, PVC, and EPDM.
A proprietary paint system that is supposedly also "fireproof".

If anyone can think of anything else I'd appreciate it. We would like to keep the cost under $0.40/sf.

We don't want to use anything metallic because per UL and the NEC, it has to be grounded, significantly increasing costs.

Thanks!
 
Replies continue below

Recommended for you

Kynar is a coating used on aluminum roofs as a weather seal.

TTFN
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor