Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations Ron247 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

We are compining an AHU DOL Starter & BMS Interface DDC inside the same 60 x 60 cm Enclosure

Status
Not open for further replies.
miblec2009

miblec2009

Electrical
Feb 4, 2013
4
We have in our project to combine Each AHU Starter (DOL) and its BMS interface (DDC) inside one enclosure 60 cm x 60 cm., is there will be any interference between the power cable feeding the starter and the BMS DDC performance , as they will be contained inside the same enclosure, and is there will be any affect on the signals of BMS carried by the BMS Cable connecting that DDC ? And if there will be an interference what will be the solution to avoid such that, as we already assempling them now in one enclosure,

Eng. Mohamed El Sayed
Technical Office Manager
 
Status
Not open for further replies.

Similar threads

NickParker
  • Locked
  • Question
IEC LV MCCs - Withdrawable starter units
Replies
2
Views
658
NickParker
NickParker
stevenal
  • Locked
  • Question
Zig-zag 60 degree phase shifting transformer
Replies
9
Views
773
stevenal
stevenal
cyriousn
  • Locked
  • Question
345kV/34.5kV Transformer Impedance & X/R 1
Replies
2
Views
971
cyriousn
cyriousn
brTCP
  • Locked
  • Question
Calculating the weight span of an overhead power line catenary under wind loading
Replies
4
Views
3K
jghrist
jghrist
Bill Baker
  • Locked
  • Question
Mixing reclosers on the same pole
Replies
1
Views
348
Palletjack
Palletjack

Part and Inventory Search

Sponsor

Back
Top Bottom