Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

WB 14: Random Vibration - response PSD

Status
Not open for further replies.
gwheeler

gwheeler

Mechanical
Joined
Oct 17, 2012
Messages
1
Location
US
I can get a response PSD at fixed or remote displacement boundary conditions... but the output is 20 evenly spaced frequency points. That's not enough to capture the real behavior given my input PSD. Consequently the resulting RMS acceleration is too low (roughly half the input). Any idea how to ask the Workbench post-processor for more response points?

Greg
 
Status
Not open for further replies.

Similar threads

cbk14
  • Locked
  • Question Question
No boundary conditions listed in PSD G Accel load in Random Vib (Ansys Mechanical)
Replies
1
Views
849
cbk14
cbk14
andradesilva
  • Locked
  • Question Question
damped vibration analysis in ANSYS Workbench
Replies
0
Views
175
andradesilva
andradesilva
RoberCR
  • Locked
  • Question Question
How can I use a variable acceleration to define a hydrostatic pressure inside a tank in ANSYS WB?
Replies
2
Views
457
RoberCR
RoberCR
kravkarfu
  • Locked
  • Question Question
Linking harmonic response to harmonic acoustics
Replies
0
Views
258
kravkarfu
kravkarfu
L_K
  • Locked
  • Question Question
LINK11 results (WB)
Replies
3
Views
524
petb
petb

Part and Inventory Search

Sponsor

Back
Top