Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Water well pumping test - proportional flow valves

Status
Not open for further replies.

cjohnson

Civil/Environmental
Joined
Nov 22, 2000
Messages
5
Location
US
Needed..recommendation as to type, distributor, etc. of proportional flow valves for use in water well pumping tests. Valves will be used to more accurately control the flow from the wells, hopefully reducing flucuations in flow, which complicate data analysis. Flows of up to 25 GPM out of 1 inch diameter pipe at surface anticipated. Generally, we like two (2) in series, which allow better overall control through a coarse/fine adjustmnet scenario.

Thaks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top