Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Water Proof Pressure Sensor

Status
Not open for further replies.

rkotha

Electrical
Joined
Jan 26, 2010
Messages
1
Location
US
Hi All,

I am looking for a pressure sensor to detect water pressure in a sump. Sensor has to be in contact with the water media directly. It should be water proof and insensitive to sun light. Also, I want the sensor the dimensions of the sensor to be relatively small. Can anyone help me in locating the vendors for this type of sensor?

Thanks for your help.

-Rama



 
I'd check with a large plumbing supply house for mercury switch used in septic tanks to activate pumps or warning devices. They may be too big for you, but seem to work forever.
 
If you are looking for something to measure "pressure" there are many vendors that carry pressure transducers.
For short term monitoring the in-Situ mini Trolls and Solinst Leveloggers, and similar variants from other vendors work great. They both have built in data logging capabilities and can be rented readily. Global Water and the likes have stand-alone transducers as well that have 4-20 mA outputs to interface with pump controls.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top