Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Warp feature in CREO

Status
Not open for further replies.
pradeepburla

pradeepburla

Structural
Joined
Aug 21, 2014
Messages
19
Location
DE
Hi Guys,

I want to bend the solid into a cylinder.So i use the warp feature in creo but I am not able to achieve the bend completely.
I am attaching the screenshots .Basically I would like the bend to be complete by ending where it started.
Link

Link

Thanks in advance.

 
 http://files.engineering.com/getfile.aspx?folder=66d29b58-74a3-47f7-b9eb-6bb2ac82aabe&file=warp_bent.png
Status
Not open for further replies.

Similar threads

CAD2015
  • Question Question
I want to know what the latest version is in Creo Parametric
Replies
0
Views
6K
CAD2015
CAD2015
CAD2015
  • Locked
  • Question Question
PTC Creo Parametric vs PTC Creo Generative design.......
Replies
2
Views
2K
CAD2015
CAD2015
CAD2015
  • Locked
  • Question Question
Learning PTC Creo..........
Replies
5
Views
2K
CAD2015
CAD2015
CAD2015
  • Locked
  • Question Question
PTC Creo electrical workbenches.........................
Replies
0
Views
875
CAD2015
CAD2015
CAD2015
  • Locked
  • Question Question
Creo Distributed Services Manager.....................................
Replies
5
Views
4K
dgeesaman
dgeesaman

Part and Inventory Search

Sponsor

Back
Top