Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Warning for SW2005 users with custom Gtol.sym 1

Status
Not open for further replies.
PDMAdmin

PDMAdmin

Mechanical
Joined
Apr 21, 2004
Messages
488
Location
US
If you are using a custom Gtol.sym file, make sure it has been copied into your SolidWorks loadpoint under lang/english before you try to load any drawings that reference your custom symbols. In SW2005, if you try to load a drawing that references symbols that don't exist in the Gtol.sym file, SolidWorks will crash. According to our VAR, this has been fixed in the upcoming SP03, but as long as your Gtol.sym file is up to date, you should not have an issue.
 
PDMAdmin,
Thanks for the warning. This will save a lot of work for many. A star for you.


Bradley
 
Status
Not open for further replies.

Similar threads

Jawed62
  • Locked
  • Question Question
Solidworks VBA with custom property
Replies
2
Views
2K
Jawed62
Jawed62
MDGroup
  • Question Question
Dual Dimension for Part Volume
Replies
4
Views
12K
ctopher
ctopher
V
Problem to open a .obj file with the textures visible on the model in Solidworks 2022
Replies
0
Views
54
victor andreevich
V
Andrejs Menkins
  • Locked
  • Question Question
Macro for DXF export (sheet metal) from part files with revision suffix
Replies
2
Views
1K
Andrejs Menkins
Andrejs Menkins
FireTruckBerserker
  • Locked
  • Question Question
Linking custom property to configuration specific dimension
Replies
1
Views
540
drawoh
drawoh

Part and Inventory Search

Sponsor

Back
Top