Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Waiving a Hydrotest

Status
Not open for further replies.
ianmcdz

ianmcdz

Mechanical
Sep 19, 2009
21
We are planning on waiving a hydrotest by meeting the requirements in API 653.

One of those requirements is written acceptance by the owner/operator. Is there a standard form somewhere in API 653/650 or 579 we can use? I can't seem to find one...

Thanks
 
Replies continue below

Recommended for you

Sort by date Sort by votes
There is not. Just write up a short memo, with signature blocks for the Inspector and the Owner, and possibly the Engineer.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

jennin77
  • Locked
  • Question
Unknown standard for this Annex A image - Valve cryo lock test
Replies
1
Views
2K
LittleInch
LittleInch
tankinspector88
  • Locked
  • Question
Weldability of a API-650 tank constructed in 1980 3
Replies
5
Views
2K
FacEngrPE
FacEngrPE
Kathia Buena
  • Locked
  • Question
API 650 Detail A - Figure F.2 1
Replies
2
Views
443
Kathia Buena
Kathia Buena
Dutch2356
  • Locked
  • Question
Chlorides residues after a hydro in a Sour Water Tank.....Issue? 1
Replies
2
Views
190
SJones
SJones
toque73
  • Question
API5CT nominal linear weight and PE linear weight
Replies
0
Views
245
toque73
toque73

Part and Inventory Search

Sponsor

Back
Top Bottom