Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Waard Model for corrosion allowance
- Thread starter rachba
- Start date
It would not normally be applied to an atmospheric tank. It is feasible to gain an insight into fluid corrosivity within pressure vessels with the model but this will require some interpretation as to the flow conditions within the vessel.
Steve Jones
Corrosion Management Consultant
All answers are personal opinions only and are in no way connected with any employer.
Steve Jones
Corrosion Management Consultant
All answers are personal opinions only and are in no way connected with any employer.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question