Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Volume of heat exchanger 1
- Thread starter Abu najad
- Start date
-
1
- #2
SuperSalad
Chemical
Cross sectional area of the inner portion tube multiplied by the length of the tube(s) for the tube side volume.
For the shell side, the cross sectional area of the inner portion of the shell side multiplied by its length; then subtract the volume taken up by the tube(s). The tube volume used in this portion would be using the cross sectional area of the outer portion of the tube.
Andrew H.
For the shell side, the cross sectional area of the inner portion of the shell side multiplied by its length; then subtract the volume taken up by the tube(s). The tube volume used in this portion would be using the cross sectional area of the outer portion of the tube.
Andrew H.
- Status
Similar threads
- Locked
- Question