Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Volume expansivity for olephine C10

Status
Not open for further replies.

Danielezammara

Industrial
Joined
Jan 10, 2003
Messages
2
Location
IT
Hy, I'm looking for volume expansivity coefficient for olephine C10+ (162 M.W.) as I must sizing a RV for thermal expansion?
The normal temperature is 35°C and the valve is set at 16 barg (temperature 70°C). Does someone have some refernce for me?
Thank you very much.
 

Danielezammara: I couldn't find in the literature the value for the cubic thermal expansion of C10+ olefins, but I pressume it couldn't be far away from the values for decane or undecane at 25 Celsius ie around 0.001/Celsius, I'd use a correction of 0.003 x delta t for a bit higher temperatures. The isothermal compressibility would be about 0.0011/Mpa with a correction factor of 0.08 x delta t a few degrees above 25 Celsius.

By dividing both values, the developed pressure in a packed up situation on heating would be estimated at around 1.2 Mpa/Celsius or 12 bar/Celsius.

Although the result doesn't refer to C10+ olefins, as you asked, I hope it is of help.
 
25362: I think i can use your data. Thank you very much
[peace]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top