A
AZwicky700
Guest
How do I find volume and find a 3D distance on a solid in inventor 9/10 (i don't think it matters much).
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
- Thread starter
- #2
S
support
Guest
Stay Tuned...
» How do I find volume and find a 3D distance on a solid in inventor 9/10 (i
» don't think it matters much).
Hello AZwicky700,
This seems to be an easy UI question that no doubt will be answered quickly so stay tuned.
Thanks for using the Q&A Board! ;-)
3DCADTips.com Q&A Board Support
» How do I find volume and find a 3D distance on a solid in inventor 9/10 (i
» don't think it matters much).
Hello AZwicky700,This seems to be an easy UI question that no doubt will be answered quickly so stay tuned.
Thanks for using the Q&A Board! ;-)
3DCADTips.com Q&A Board Support
- Thread starter
- #3
S
support
Guest
Here you go...
» How do I find volume and find a 3D distance on a solid in inventor 9/10 (i
» don't think it matters much).
For volume: File > iProperties, Physical and Update to get volume.
For distance you could use: Tools > Measure. You can pick edges, faces, etc. to measure. You can also measure the length of a sketch.
Thanks for using the Q&A Board! ;-)
3DCADTips Q&A Board Support
» How do I find volume and find a 3D distance on a solid in inventor 9/10 (i
» don't think it matters much).
For volume: File > iProperties, Physical and Update to get volume. For distance you could use: Tools > Measure. You can pick edges, faces, etc. to measure. You can also measure the length of a sketch. Thanks for using the Q&A Board! ;-)
3DCADTips Q&A Board Support
