Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

volume difference

Status
Not open for further replies.

abranda

Mechanical
Joined
Jul 4, 2016
Messages
2
Location
FR
Hi everyone,

I am using ANSYS Workbench and when I go from Design Modeler to Mechanical I found different volume values for some body. For example, the volume is 0.1407m^3 in Design Modeler but it go to 3.59m^3 in Mechanical. Therefore, I found a wrong mass...

Do you have an idea to fix this problem?

Have a nice day,

Mric
 
 http://files.engineering.com/getfile.aspx?folder=f653db62-01b7-40ff-ae65-e2392cbcf258&file=volume.jpg
more info:

- I am using the same units
- I did not have the same centroid between Design Modeler and Mechanical

Thank you for your help
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top