suren12564
Mechanical
For one of our new project we have tp put Calibration Pot at the pump( mechanical operated diaphragm pupms) suction and Pulsation dampener( volume type pulsation dampener) at the discharge. Could any one please gude me for sizing the Calibration Pot and Pulsation dampener to suit below mentioned operating conditions.
Fluid being pumped: Naocl with Oxalic Acid
Flow rate: Min/Nor/Max m^3/hr : 0.5/1.2/2.5
Suction Pressure: Atmospheric
Discharge Pressure: 2.5 Kg/cm^2 Absolute.
Any additional data required,the same can be provided.
Fluid being pumped: Naocl with Oxalic Acid
Flow rate: Min/Nor/Max m^3/hr : 0.5/1.2/2.5
Suction Pressure: Atmospheric
Discharge Pressure: 2.5 Kg/cm^2 Absolute.
Any additional data required,the same can be provided.
