Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

VME replacement board

Status
Not open for further replies.

fsmyth

Electrical
Joined
Jan 1, 2005
Messages
220
Location
US
Haven't had much luck on other forums, so I will try here:

I need to find a 6U 386 or 486 processor board for a
VMEbus, preferably with the associated hard/floppy drive
board to plug into it. The original vendor was
"Logical Design Group", the board type is "XP-Platform",
the BIOS is Quadtel 286(!) / XP+ SYS V1.20.
There is a label: "C9537WAB/94050-1-MOD"
On-board IDE/FDD, front panel: VGA/LPT/COM1/COM2/keyboard.
It HAS to be 386/486 (don't ask). The drives on the
current second board are pretty much standard laptop.
<als>
P.S. did I mention that this is an emergency (railroad
equipment down and non-functional until replacement)?
And that the equipment manufacturer has no suitable
inventory? Or that the machine is one-of-a-kind, and
about 12 years old?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top