Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Visual Inspection

Status
Not open for further replies.
GemmellG

GemmellG

Materials
Joined
Jun 28, 2012
Messages
89
Location
CA
Can anyone confirm if ASME Codes listed below require a certain level of visual inspector certification.
ASME Sec 1
ASME Sec VIII-Div.1
ASME Sec B31.1
ASME Sec B31.3
 
Sort by date Sort by votes
For Section I visual inspection is mentioned. In this case, if the ASME Certificate holder uses VI, it would have to be described in their QA/QC Manual. This would probably include reference to ASME Section V Article 9.
 
Upvote 0 Downvote
Both B31.1 and B31.3 provide requirements for VT.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Sid89
  • Locked
  • Question Question
LED Light Tables for visual inspection
Replies
0
Views
290
Sid89
Sid89
PetkovStoyan
  • Locked
  • Question Question
Inspection of keyway in bore
Replies
13
Views
2K
geesaman.d
geesaman.d
CTengIS
  • Locked
  • Solved
Hole position inspection without CMM, primary datum simulation
Replies
1
Views
990
geesaman.d
geesaman.d
Bazinga
  • Locked
  • Question Question
Inspection Plugs on hot insulation
Replies
4
Views
517
0707
0707
ASIT859
  • Locked
  • Question Question
FARO Cam2 - Straight Slot Surface Datum A, Flat Surface Datum B Inspection?
Replies
0
Views
871
ASIT859
ASIT859

Part and Inventory Search

Sponsor

Back
Top