Jun 9, 2004 #1 fvincent Mechanical May 14, 2002 117 Can some one help me find the viscosity of a 20%weight Na2SO3 solution at 40oC? Thanks a lot fvincent
Can some one help me find the viscosity of a 20%weight Na2SO3 solution at 40oC? Thanks a lot fvincent
Jun 9, 2004 1 #2 cub3bead Chemical May 28, 2003 292 Contact Solvay Chemicals at: Solvay Chemicals, Inc. PO BOX 27328 Houston, TX 77227-7328 3333 Richmond Ave. Houston, Texas 77098 http://www.solvaychemicals.us Upvote 0 Downvote
Contact Solvay Chemicals at: Solvay Chemicals, Inc. PO BOX 27328 Houston, TX 77227-7328 3333 Richmond Ave. Houston, Texas 77098 http://www.solvaychemicals.us
Jun 9, 2004 Thread starter #3 fvincent Mechanical May 14, 2002 117 Thanks,cub3bead In fact I tried but the only answer I got was to consider as if pure water. Since I need the information to calculate the specific surface of droplets in a venturi scrubber I have to get more detailed data. Thanks anyway. Regards fvincent Upvote 0 Downvote
Thanks,cub3bead In fact I tried but the only answer I got was to consider as if pure water. Since I need the information to calculate the specific surface of droplets in a venturi scrubber I have to get more detailed data. Thanks anyway. Regards fvincent
Jun 9, 2004 #4 hacksaw Mechanical Dec 7, 2002 2,586 your application requires more than a simple estimate of liquid viscosity (nearly that of water). most scrubber app's hardly deal with pure mixtures and you may find that other parameters are more important such as surface tension etc. you might try some of the TAPPI resources,but you have to be a member to get access. Upvote 0 Downvote
your application requires more than a simple estimate of liquid viscosity (nearly that of water). most scrubber app's hardly deal with pure mixtures and you may find that other parameters are more important such as surface tension etc. you might try some of the TAPPI resources,but you have to be a member to get access.
Jun 9, 2004 #5 cub3bead Chemical May 28, 2003 292 I kept up the Googling and found the following link: http://www.furrowpump.com/Vol 10.pdf If you page down you will find data for a 18% Na2SO3 solution: 1.2 SG and 2.5 cps viscosity. Upvote 0 Downvote
I kept up the Googling and found the following link: http://www.furrowpump.com/Vol 10.pdf If you page down you will find data for a 18% Na2SO3 solution: 1.2 SG and 2.5 cps viscosity.
Jun 9, 2004 Thread starter #6 fvincent Mechanical May 14, 2002 117 Thanks a lot... Regards fvincent Upvote 0 Downvote
Jun 14, 2004 #7 jmw Industrial Jun 27, 2001 7,435 If viscosity is a critical parameter and it can vary then why not measure in-line? JMW http://www.viscoanalyser.comEng-Tips: Pro bono publico, by engineers, for engineers. Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora. Upvote 0 Downvote
If viscosity is a critical parameter and it can vary then why not measure in-line? JMW http://www.viscoanalyser.comEng-Tips: Pro bono publico, by engineers, for engineers. Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
